Kangaroo joey feeding pump instruction manual

This interface guides the user through the programming of the pump based on what pump-set is loaded into the device. The pump-set is identified using Magnetic Intelligent Set Type Identification Connector or MISTIC. Once the pump-set is identified, the Kangaroo Joey feeding pump will ask questions for . Kangaroo Joey feeding pump. Use only the supplied power adapter to charge your Kangaroo Joey feeding pump from an AC power source. Use only Kangaroo Joey enteral feed and flush pump with pole clamp A/C power adapter (with built-in A/C adapter) with pump. Page 8 Used feeding sets should be disposed of in accordance with current hospital procedure or local disposal guidelines. Kangaroo™ Epump Enteral Feed and Flush Pump with Pole Clamp 3 Table of Contents Section II — Safety and Warnings Caution: U.S. federal law restricts the sale of this device to physicians or to their direct representatives. 1. Read this booklet thoroughly before using the Kangaroo Epump Enteral Feed and Flush Pump.

Using A Kangaroo ™ Joey Feeding Pump - 6 - Step 3: Attach the feeding bag to the pump 1. With the pump screen facing you, lift up on the blue lid to open the top of the pump. 2. To load the tubing into the pump, grasp the finger tab on the light purple valve and slide the valve into the front channel of the pump. Make sure to. The Covidien Kangaroo Joey Pump is a compact, easy to use, option for your enteral feeding www.doorway.ru ease of use for this feeding pump comes from the interface that is similar to an ATM. This interface guides the user through the programming of the pump based on what pump-set is loaded into the device. KANGAROO JOEY Feeding Pump Instructions for use Key points: 1. Wash your hands with antibacterial soap before handling your feeding tube and supplies. 2. If you have more than one catheter (example: feeding tube and I.V.), always double check to make sure you are infusing your formula into the feeding tube and not into the I.V. line. 3.

battery of the Kangaroo Joey feeding pump. Use only the supplied power adapter to charge your Kangaroo Joey feeding pump from an AC power source. Use only Kangaroo Joey enteral feed and flush pump with pole clamp A/C power adapter (with built-in A/C adapter) with pump. See Section XIII - Service Part Numbers for replacement of A/C power adapter. 5. Using A Kangaroo ™ Joey Feeding Pump - 8 - “hold”. Choose “run” when you are ready to re-start the feeding. The pump can be on “hold” for 10 minutes before it alarms. 4. When the feeding is done, press and hold the power button (which looks like this:) until the pump shuts off. Throw the bag out if it has been. of feeding pump 1. Grasp thumb tab on valve and insert into left pocket — ensure valve is fully seated. Thumb tab should align with slot in blue door. 2. Grasp black ring retainer, gently wrap tubing around rotor and insert retainer directly into right pocket. Do not overstretch tubing. 3. To properly unload a pump set, power off the pump and wait.